Below is an annotated list of new and withdrawn ASTM Standards related to the built Environment. They are derived from weekly ASTM Tracker updates from January to June 2011. For more information on the standards listed, or information on obtaining ASTM International Standards Tracker service, go to
http://www.astm.org./New Standards
A1068, Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products.
A1069/A1069M, Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes.
A1071/A1071M, Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys.
B976, Standard Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors, Composite Reinforced (ACCR).
C1738, Standard Practice for High-Shear Mixing of Hydraulic Cement Pastes.
C1740, Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method.
C1741, Standard Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout.
D7338, Standard Guide for Assessment Of Fungal Growth in Buildings.
D7444, Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics.
D7475, Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions.
D7488, Standard Test Method for Open Time of Latex Paints.
D7519, Standard Test Method for Internal Bond Strength and Thickness Swell of Cellulosic-Based Fiber and Particle Panels After Repeated Wetting.
D7586/D7586M, Standard Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies.
D7615/D7615M, Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates.
D7616/D7616M, Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures.
D7617/D7617M, Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars.
D7643, Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders.
D7672, Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies.
D7682, Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty.
D7698, Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method.
D7702, Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics.
D7706, Standard Practice for Rapid Screening of VOC Emissions from Products Using Micro Scale Chambers.
D7726, Standard Guide for The Use of Various Turbidimeter Technologies for Measurement of Turbidity in Water.
E2658, Standard Practices for Verification of Speed for Material Testing Machines.
E2787, Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS).
E2797, Standard Practice for Building Energy Performance Assessment for a Building Involved in a Real Estate Transaction.
E2798, Standard Test Method for Characterization of Performance of Pesticide Spray Drift Reduction Adjuvants for Ground Application.
E2808, Standard Guide for Microspectrophotometry and Color Measurement in Forensic Paint Analysis.
E2811, Standard Practice for Management of Low Risk Property (LRP).
F2707, Standard Safety Performance Specification for Safe Design and Installation of Field Fabricated Suction-Limiting Vent Systems for Suction Entrapment Prevention in Swimming Pools, Spas, Hot Tubs, and Wading Pools.
F2747, Standard Guide for Construction of Sand-based Rootzones for Golf Putting Greens and Tees.
F2762, Standard Specification for 12 to 30 in. [300 to 750 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications.
F2763, Standard Specification for 30 to 60 in. [750 to 1500 mm] Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications.
F2766, Standard Test Method for Boat Barriers.
F2829, Standard Specification for Metric-Sized Crosslinked Polyethylene (PEX) Pipe Systems.
F2830, Standard Specification for Manufacture and Joining of Polyethylene (PE) Gas Pressure Pipe With a Peelable Polypropylene (PP) Outer Layer.
F2831, Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems.
F2832, Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners.
F2833, Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type.
F2854, Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing.
F2855, Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing.
F2875, Standard Guide for Laboratory Requirements Necessary to Test Commercial Cooking and Warming Appliances to ASTM Test Methods.
F2877, Standard Test Method for Shock Testing of Structural Insulation of a Class Divisions Constructed of Steel or Aluminum.
F2881, Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications.
F2891, Standard Specification for Commercial Bulk Milk Dispensers, Mechanically Refrigerated.
F2897, Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances).
F2898, Standard Test Method for Permeability of Synthetic Turf Sports Field Base Stone and Surface System by Non-confined Area Flood Test Method.
G198, Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood.
Withdrawn Standards
A840, Standard Specification for Fully Processed Magnetic Lamination Steel, has been withdrawn, with no replacement.
B68M, Standard Specification for Seamless Copper Tube, Bright Annealed [Metric], has been withdrawn, with no replacement.
B102, Standard Specification for Lead- and Tin-Alloy Die Castings, has been withdrawn, with no replacement.
B345/B345M, Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems, has been withdrawn, with no replacement.
C935, Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast, has been withdrawn, with no replacement.
C1137, Standard Test Method for Degradation of Fine Aggregate Due to Attrition, has been withdrawn, with no replacement.
C1404/C1404M, Standard Test Method for Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct Tension, has been withdrawn, with no replacement.
D8, Standard Terminology Relating to Materials for Roads and Pavements, has been withdrawn, with no replacement.
D3455, Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin, has been withdrawn, with no replacement.
D5019, Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane, has been withdrawn, with no replacement.
D5271, Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System, has been withdrawn, with no replacement.
D5714, Standard Specification for Content of Digital Geospatial Metadata, has been withdrawn, with no replacement.
D5951, Standard Practice for Preparing Residual Solids Obtained After Biodegradability Standard Methods for Plastics in Solid Waste for Toxicity and Compost Quality Testing, has been withdrawn, with no replacement.
D6002, Standard Guide for Assessing the Compostability of Environmentally Degradable Plastics, has been withdrawn, with no replacement.
D6041, Standard Specification for Contact-Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings, has been withdrawn, with no replacement.
D6723, Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT), has been withdrawn, with no replacement.
D6771, Standard Practice for Low-Flow Purging and Sampling for Wells and Devices Used for Ground-Water Quality Investigations, has been withdrawn, with no replacement.
D6816, Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders, has been withdrawn, with no replacement.
D6847, Standard Test Method for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures, has been withdrawn, with no replacement.
D6852, Standard Guide for Determination of Biobased Content, Resources Consumption, and Environmental Profile of Materials and Products, has been withdrawn, with no replacement.
E577, Standard Guide for Dimensional Coordination of Rectilinear Building Parts and Systems, has been withdrawn, with no replacement.
E835/E835M, Standard Guide for Modular Coordination of Clay and Concrete Masonry Units has been withdrawn, with no replacement.
E1535, Standard Test Method for Performance Evaluation of Anaerobic Digestion Systems, has been withdrawn, with no replacement.
E1864, Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures has been withdrawn, with no replacement.
E2221, Standard Practice for Administrative Control of Property, has been withdrawn, with no replacement.
F1343, Standard Specification for Anesthetic Gas Scavenging Systems-Transfer and Receiving Systems, has been withdrawn, with no replacement.
F1931, Standard Test Method for Characterization of Gymnastic Landing Mats and Floor Exercise Surfaces, has been withdrawn, with no replacement.
F2196, Standard Specification for Circulating Liquid and Forced Air Patient Temperature Management Devices, has been withdrawn and replaced by ANSI/IEC-80601-2-35
No comments:
Post a Comment